Lights; Iris - JVC AV-P1000U Manuel D'instructions

LIGHTS

● Press to light either the side or back illumination.
● If the illumination does not light, press this button. The
indicator blinks for about 2 seconds and lights, then the
side illumination lights.
● When the side illumination is lit, press this button. The
indicator blinks for about 2 seconds and lights, then the
back illumination lights.
● When the back illumination is lit, press this button. The
indicator and the back illumination go out.

IRIS

● Press these buttons to adjust the brightness.
● The numeric value is shown in the screen's upper left when
this button is pressed. Press the
brightness and the button to decrease it.
● Press the
and buttons simultaneously to reset the
iris to 0.
Note :
When the iris is set automatically with the ON-SCREEN
ADJUSTMENTS, the iris may not function or it may take
some time to function when the brightness is insuffi-
cient. In this case, turn on the side lights.
* To adjust the brightness, set the IRIS MODE to MANUAL
with the ON-SCREEN ADJUSTMENTS.
button to increase the
ON-SCREEN ADJUSTMENTS FOCUS
LIGHTS IRIS MENU/ENTER
NEAR
VIDEO PC FREEZE AUTO WHITE
SET
OUT
ON-SCREEN ADJUSTMENTS FOCUS
LIGHTS IRIS MENU/ENTER
VIDEO PC FREEZE AUTO WHITE NEAR
SET
OUT
ZOOM
1 PRESET 2
TELE WIDE
FAR
DIGITAL
ZOOM
1 PRESET 2
TELE WIDE
FAR DIGITAL
13