Functions - Breville the Soft Top BKE625 Manuel D'instructions

Components
A
C
D
E
F
G
H
A. Soft Opening Lid with
Viewing Window
B. Lid Release Button
C. Removable Scale Filter
D. Dual Water Windows
E. 7 Cup / 1.7L Capacity
F. Auto Shut-Off & Boil Dry Protection
* Breville makes its BPA free claim for this product based on independent laboratory testing performed
for all the food contact plastic materials of the product per EU Commission regulation No. 10/2011.
8
G. Rapid Boil 1500W Concealed Element
H. Multi-Directional Base with
Cord Storage
I. Illuminated Power 'On/Off' Switch
J. Breville Assist ‰ Plug (not shown)

Functions

BEFORE FIRST USE
Remove any promotional material attached to
your kettle. It is recommended that before first
use, the kettle is filled to the maximum level
with cold tap water, boiled and water discarded.
B
Your kettle will only operate when positioned
on the power base with the 'On/Off' switch in
the 'On' position. The kettle will automatically
switch off once the water has boiled.
OPERATION OF YOUR KETTLE
To fill the kettle, remove it from the power base
and open the lid by pressing the lid release
button. Fill with the desired amount of water.
NOTE
Always fill the kettle between the minimum
(MIN) and maximum (MAX) marks on the
water window. Too little water will result in
the kettle switching 'Off' before the water has
boiled. Filling above maximum (MAX) mark
may result in boiling water splashing from
I
the kettle.
Close the lid, ensuring it is locked firmly into
place. Position the kettle securely onto the
power base and insert the power plug into a
110/120V power outlet.
Press the 'On/Off' switch to the 'On' position
for water to boil.
NOTE
To operate correctly, the kettle should always
be used with the scale filter firmly in place.
NOTE
This kettle must only be used with the power
base supplied. Use caution when pouring water
from your kettle, as boiling water will scald. Do
not pour the water too quickly.
The kettle will automatically switch 'Off' once
the water has boiled. Lift the kettle from the
power base and pour the water. Take care to
hold the kettle level, especially when filled
to the maximum level. To re-boil it may be
necessary to wait for a few seconds to allow
the control to reset.
If further heating of the kettle is not required,
unplug the power cord and empty the water
from the kettle. Replace the kettle onto the
power base and close the lid.
SAFETY BOIL DRY PROTECTION
The kettle is fitted with a safety device which
protects against overheating should the kettle
be operated with insufficient water. If this
occurs, the kettle will stop heating. Allow kettle
to cool before refilling. Remove the kettle from
the power base and add water. Return the kettle
to the power base. The safety device will then
automatically reset.
For additional safety, your kettle is fitted with
an additional thermal cut out. In the event of
overheating, the kettle will automatically shut
down to prevent further damage. Should this
occur, contact Breville Consumer Service.
WARNING
This appliance is designed for boiling drinking
quality water only. Never use to heat or boil
any other liquids or foodstuffs. The lid should
always be firmly in place and locked into the
closed position before use.
WARNING
Do not press the lid release button on the
handle to open the lid during operation. This
may result in boiling water splashing from the
kettle. Pour out all the hot water from the kettle
before opening the lid to refill.
9