Simple Manual - LG SN5R Manuel Simplifié

SIMPLE MANUAL

Wireless Rear Speakers
Kit
Please read this manual carefully before operating your set and retain it for
future reference.
To view the instructions of advanced features, visit http://www.lg.com and
then download Owner's Manual. Some of the content in this manual may
differ from your unit.
MODEL
SPJ4-S
MFL71672724
2005_Rev02 Copyright © 2020 LG Electronics Inc. All Rights Reserved.
SPJ4-S(SN5R).DCANLLK_SIM (Sheet)_MFL71672724.indd 1-4
1 Rear Speakers Connection 2
a Connect the power cord of wireless receiver to
Speaker design and connection method may be
the outlet.
different according to models.
b
Turn on the unit: The unit and wireless receiver
will be automatically connected. The receiver's
yellow - green LED turns on.
Wireless Receiver Connection Manually
Transparent
If the rear speakers do not make sound, try to
connect manually.
Black stripe
a Press PAIRING button on the rear of the
Rear speaker
(Left) wireless receiver.
y The yellow - green LED on the wireless receiver
blinks quickly.
b Turn on the main unit.
Wireless Rear speaker
Receiver
(Right)
c Pairing is completed.
y The yellow - green LED on the wireless receiver
Black stripe
turns on.
Transparent
a Connect the speaker cables to rear speakers
correctly.
b Connect the Wireless Receiver and the rear Set the distance between the sound bar and
speakers (Blue: left, Grey: right) with the speaker the wireless receiver as close as possible and
cables. keep them away from the device (ex. wireless
c Turn on the Surrond function to enjoy surround router, microwave oven, etc.) over 1 m (3.3 ft)
sound. to prevent wireless interference.
www.lg.com
Wireless Receiver Connection Surround Sound On/Off
When you turn on surround function, you can enjoy
magnificent surround sound for all the input sound
source with rear speakers.
The initial setting for the surround function is
OFF, turn the surround function ON to use it.
Surround On: Press and hold button on the remote
control about 3 seconds and then press
repeateadly to select ON - SURROUND in the display
window.
Surround Off: Press and hold button on the
remote control about 3 seconds and then press
button repeateadly to select OFF - SURROUND in the
display window.
> 1 m
(3.3 ft)
Industry Canada Statement
Additional Information
[For having wireless function (WLAN, Bluetooth,...)]
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Specification of Wireless reciever
Economic Development Canada' s licence-exempt RSS(s).
Power Refer to the main label on the
Operation is subject to the following two conditions:
requirement wireless receiver.
(1) This device may not cause interference.
(2) This device must accept any interference, including
Refer to the main label on the
Power
interference that may cause undesired operation of the
wireless receiver.
consumption
device.
Approx.
Dimensions CAN ICES-3 (B)/NMB-3 (B)
60 mm x 220 mm x 175 mm
(W x H x D)
(2.4 inch x 8.7 inch x 6.9 inch) IC Radiation Exposure Statement
[For having wireless function (WLAN, Bluetooth,...)]
button Design and specifications are subject to change
without notice.
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment. This
About Ferrite Core (Optional)
equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
twice
antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER'S
AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For product having the wireless function using 5 GHz
frequency bands]
i. the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential
for harmful interference to co-channel mobile
satellite systems;
ii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in the
bands 5250-5350 MHz and 5470-5725 MHz shall
be such that the equipment still complies with the
e.i.r.p. limit;
iii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in
the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits as
appropriate; and
iv. [for devices operating in the band 5250-5350 MHz
having an e.i.r.p. greater than 200 mW] antenna
type(s), antenna models(s), and worst-case tilt
angle(s) necessary to remain compliant with the
e.i.r.p. elevation mask requirement set forth in
section 6.2.2.3 of RSS-247 shall be clearly indicated.
Users should also be advised that high-power radars
are allocated as primary users (i.e. priority users) of the
bands 5250-5350 MHz and 5650-5850 MHz and that
these radars could cause interference and/or damage to
LE-LAN devices.
LG Customer Information Center
1-888-542-2623 CANADA
Register your product Online!
www.lg.com
2020-04-21 3:44:19