auna Harvard IR Mode D'emploi page 66

EN
66
<Select> buttons on the remote control to choose 'YES'. If you want to
use stereo reception turn and press the Select dial or use the <Select>
buttons on the remote control to choose 'NO'.
FM scan
You can choose whether automatically stops at the next available FM
station or the next available FM station with a strong signal when scanning
for an FM station. To change the FM scan setting:
1. Press the MENU button on the remote control or hold the MENU button
repeatedly on the main unit to select MENU function.
2. Turn and press the Select dial or use the <Select> buttons on the remote
control to choose 'Scan Setting'.
3. To automatically stop at the next available FM station with a strong
signal, turn and press the Select dial or use the <Select> buttons on
the remote control to choose 'YES'. To automatically stop at the next
available FM station regardless of the signal strength, turn and press the
Select dial or use the <Select> buttons on the remote control to choose
'NO.