1.Half screw out the two big screws outside the grill body,
then put Part No.66 onto the relevant screw holes and screw tightly.
2.Screw Part No.66 tightly with B screw and D spacer inside the grill body.
3. Screw part No 65 tightly with 2XA & Screw part No 67 tightly with 1XB
Figure 9.1
Install Part No.25 onto Part
No.26 with two A screws.
Figure 10.1
B+D
2 x
A
12
A
B
Figure 9.2
1 x
A
Install Part No.27 onto Part
No.26 with 2XE & 1XA screws.
Figure 10.2
3 x B
2 x D
2 x A
2 x
E