Publicité
Les langues disponibles
Les langues disponibles
I N T R O D U C T I O N
On page 44 you will find the technical specifications of the LBC 500.
Charge
status
2 functions:
Overview charge setting
-
Overview type of error at request
-
The LBC 500 is a fully automatic battery charger and float charger in one and can be
left connected to the mains power supply permanently. The micro processor
supervises the battery and the charge process continuously so that a very safe and
accurate process can be guaranteed. The internal electronics comes from the latest
developments, which resulted in a exceptionally intelligent battery charger.
The LBC 500 can be used for a large diversity of battery types, such as Starting,
semi-traction, traction, GEL, AGM, Calcium, Spiral and LifoPo4. The charger is suitable
for many battery types because the charge voltages can be set. See chapter 'SETTING
THE CHARGER', section 'charge voltages'.
During the charge process, and also when the charger is in its float stage, potential
users may be turned on. The charger will indirectly supply the present consumers and
the battery is spared. Keep in mind that when charging a (partially) empty battery,
the current draw of the present consumers comes at the expense of the charge
current for the battery. If you only want to use the charger as a power supply, then
put the charger in its power supply mode, see chapter 'SETTING THE CHARGER'
section 'charger as power supply'.
You can use multiple power sources, like solar panels or a dynamo, together with the
LBC 500 battery charger.
Charger status
3 functions:
Setting the charger
Turning charger on/off
Request error
Connection to battery
English
12
Publicité
