Gaggia GIMultix POWER Professional Manuel D'instructions page 39

OPTIONAL ACCESSORIES FOR STEAM / VACUUM FEATURES
HOW TO FIT THE TOOL: Introduce the brush into the female
end of the extension tube and turn the ring nut (6) in the direction
indicated. Fit the stiff or soft round brush to the brush body and
engage it.
CURVED END FOR NOZZLE
The curved end can be attached to the nozzle (19). This tool concentrates
steam pressure to remove particularly stubborn dirt. With its peculiar shape,
this tool is ideal for cleaning hard to reach areas. A small nylon, copper or
stainless steel brush can be attached to the tip.
HOW TO FIT THE TOOL: Introduce the end piece
into the tip of the nozzle and push in the direction
indicated.
SMALL NYLON, STAINLESS STEEL OR COPPER BRUSH
This tool can be attached to the curved end for nozzle (19).
It uses a combination of mechanical action and steam to remove
stubborn dirt.
ROUND BRUSH ASSEMBLY WITH SOFT, STIFF OR STIFF
TRIANGULAR INSERTS
This brush can be attached to the handle or to the extension hoses
and is ideal for vacuuming gaps.
Three different inserts are available with soft or stiff bristles o
triangular stiff bristles, which can be
installed to the round brush assembly.
HOW TO FIT THE TOOL: Introduce the small brush into the
curved end piece for nozzle and tighten in the direction indicated.
38
6