Connection - JETI model Duplex RCSW Mode D'emploi

computer radio control system computer radio control system
Switching is indicated by a green LED that is visible through the
opening on the side of the RC Switch.
Setting the polarity of the switch is specific for each JETI model
product, in the chart below there is a list of several supported
devices and their RC Switch settings for DC and DS transmitters.
Central Box 200
Central Box 400
Master Switch

2 Connection

In normal mode the Ext slot is not used for output. It is used for
pairing, for software updates and for connecting the JETIBOX
terminal. However it is possible to supply power to both the RC
Switch and the RC Power Switch through the Ext. or Control
Output slots.
RC Switch
●
Switched output is a signal line.
DEVICE
SBEC 40
DPS 40
SPS 20
DSM 10
Inverted polarity of the switch
✓
✘
✘
✘
✘
✘
✘
15
EN