Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
UNIFIX 50.2 WB
PANEL COMPATIBILITY
Unifix 50.2 WB can fix 1 panel with 4 holes in the frame at the spacing as below:
120 mm
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load
with the panel:
Mount
Unifix 50.2 WB = 2,3 kg
Fastening: to prevent large quantities of snow from accumulating behind the sensor, install
appropriate barrier grids.
The position of the solar panel influences your electrical production. Choose the most optimal inclination
and orientation to suit your environment. Avoid shaded areas or objects that are a source of shadow
(eg tree)
Before attaching and connecting, please observe:
•
the maximum distances between each element shown below.
•
connecting order
SAFETY INSTRUCTIONS
•
Take the appropriate measures to prevent accidents during your mounting steps.
•
If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk
of getting burnt. Make sure to protect yourself accordingly.
•
When finished, check and ensure that all of your brackets and panels are fixed properly
Unisun 30.12M /50.12M / 55.12BC
www.uniteck.fr
500 mm
Panel
=3,1kg /4,1kg/ 3,8kg
EN
11
Publicité
Table des Matières
