This air cleaner is designed for use in system up to 1400 CFM. For higher airflows additional units may be required. See
Typical Installation below
IMPORTANT: A 26 INCH CLEARANCE MUST BE ALLOWED FOR REMOVAL OF THE MEDIA CARTRIDGE FROM THE CABINET
1
Turn off the electricity to the furnace
2
Remove front cover
3
Slide media cartridge from air cleaner cabinet, and discard packing material
4
Remove and discard existing furnace air filter
5
Install cabinet in return air system. Properly install airflow direction arrows on interior of cabinet. Duct supports are
recommended to support weight of cabinet. See typical instructions.
6
Slide the media cartridge into the cabinet. Be sure the airflow arrow on the cartridge is in the same direction as the
arrow in the cabinet. The wire mesh is always on the downstream side of the filter media. Replace cover.
7
If a condition indicator is to be used, install on a vertical duct surface between the air cleaner and the furnace
blower.
8
Turn on electricity and furnace and check performance of all equipment.
Our Brands
®
Last Updated: 06-2021
HIGH EFFICIENCY MEDIA AIR CLEANER INSTALLATION
INSTALLATION INSTRUCTIONS
GF-1625-11 Media Air Cleaner
For installation in the return air duct of any
Forced air heating & cooling system
400 Midwest Rd.
Toronto, ON M1P 3A9
Canada
Toll Free: (888) 216-9184
www.generalaireiaq.ca
sales@GeneralAireIAQ.ca