Replacing Filters; Cleaning Care - Winix AAPU500-JLE Manuel D'utilisation

REPLACING FILTERS

1712-0110-04

CLEANING CARE

Cleaning the Filters:
Clean with a vacuum or a soft brush.
• Only clean the Pre-Filter.
• This filter CAN NOT be washed.
• Intervals between filter cleaning may vary
depending on the air quality.
Cleaning the Smart Sensor (Dust Sensor):
Clean Smart Sensor (Dust Sensor) with vacuum cleaner.
• Cleaning interval : EVERY 2 MONTHS.
N O T I C E
• Do not use benzene, alcohol, or other volatile fluids,
which may cause damage or discoloration.
8 AAPU500-JLE
FILTER
O
After replacing a filter,
press the RESET button
for at least 5 seconds.a
Cleaning the Exterior & Interior:
Wipe with a soft damp cloth using room temperature
water. Afterwards, wipe it down with a clean dry cloth.
After turning the product upside down, remove the filter
cover and clean the interior with a vacuum cleaner.
• For optimal performance, clean every 14 days.
N O T I C E
• When cleaning the unit, always unplug the power cord
first and then wait until the unit has cooled down.
• Never disassemble, repair, or modify this unit yourself.
• Do not use flammable sprays or liquid detergents.
• Do not allow children to clean or maintain the unit.
• Before cleaning or maintaining, ensure unit is unplugged.
English