Cleaning Instructions - Nemaxx BT80 Mode D'emploi Original

KEN001BT55

CLEANING INSTRUCTIONS

● Stop running the device before cleaning.
● Please pull out the plug when the device stops running completely.
Cleaning of the main unit
● Use a soft cloth with warm water and diluted neutral cleaning solution.
● Use vacuum cleaner to clean the dust covered on the air inlet board.
ATTENTION
Do not use harsh cleaning products.
It will cause deformation and discoloration.
Cleaning of bucket
Clean it with running water two or three times.
WHEN NOT USING FOR A LONG TIME
1. Pull out the plug; put away the power line and put it in dry and cool place.
2. Don't store the device horizontally, or it will cause malfunction or abnormal sound.
3. Install the humidity sensor out of the unit when using it in place where it has a high
demand of humidity.
Please have this change done by professional business.
4. Empty water of the bucket completely.
5. Clean main unit.
6. Cover the unit with a plastic bag.
7. Place the device at dry and ventilated place.
ATTENTION
Don't tilt or lay the device on the side
(It will cause leakage if there is still water in it).
All manuals and user guides at all-guides.com
EN
10
Version: 5.0
28.08.2017