Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Assembly
a) Important note
b) Installation
The crossbeams (6) and shelves (9) provide structural strength and stability. Do not assemble
without them in place.
1. Start by assembling the base as shown in figure 1.
2. Attach the feet (10) (11) to the base.
3. Insert a shelf (9).
4. Continue to build each level up the same way as shown in figure 2).
(Figure 1)
(Figure 2)
7
2
1
3
9
10
11
Cleaning and care
Under no circumstances use aggressive cleanings agents, cleaning alcohol or other chemical solutions since
these can penetrate the housing or impair functionality.
Use a dry, soft and clean cloth for cleaning.
Disposal
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Loading capacity ................................... 175 kg (per shelf)
Thickness of upright ............................. 0.6 mm
Thickness of beam ............................... 0.55 mm
Thickness of shelf ................................. 5 mm
Dimensions (L x W x H) ........................ 700 x 700 x 1800 mm
Weight .................................................. 16 kg
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE.
8
5
4
6
*2368900_v3_0721_02_dh_m_en
Publicité
Table des Matières
