sunjoe 24V-AJC-CT Manuel D'utilisation page 11

Adapter Functions (Fig. 7)
• The tapered adapter can be used on smaller air valves to
inflate items like floats and children's toys, which usually
require the user to inflate them by blowing air into them.
• The sport ball needle can be used to inflate any type of
sports ball or any other item that requires a sport ball
needle.
• The Presta valve adapter can be used to inflate Presta valve
stem tires as shown. Before inflating a tire with a Presta
valve, loosen the locking nut to inflate. Once inflation is
complete, tighten the locking nut to seal the tire valve.
Fig. 7
Tapered
adapter
To use the Presta valve adapter:
1. Loosen Presta valve locking nut (Fig. 8).
Fig. 8
To tighten
2. Thread Presta valve adapter onto valve stem with larger
open end toward wheel (Fig. 9).
3. Clamp the end of the air chuck down onto the Presta
valve adapter by pressing air chuck clamp down until it
locks into place (Fig. 9).
4. After inflation, remove air chuck and tighten locking nut
(Fig. 9).
Fig. 9
To lock
Air chuck
clamp
Air hose
Sport ball Presta valve
needle adapter
Locking nut
To loosen
Presta valve stem
To unlock
Air chuck
Presta valve adapter
Presta valve stem
Digital Gauge
The digital gauge on the air compressor is multifunctional. It
serves as a pressure gauge, monitors the amount of pressure
being applied to the item being inflated.
To switch from PSI, BAR, or KPA.
1. With gauge ON, press the power button to select the
desired measuring unit (Fig. 10).
Fig. 10
Power button
To set pressure gauge for automatic shut off:
1. With gauge ON, press and hold down [ + ] or [ – ] buttons
to select desired shutoff pressure (Fig. 11).
NOTE: Numbers will flash while setting pressure. Holding
buttons down will make the pressure number increase
faster.
2. When desired setting has been selected, begin inflating.
Air compressor will shut off once setting is reached.
Fig. 11
Air pressure
(+) Button (–) Button
11
Air pressure
measurement
units
PSI
BAR
KPA
0.0
PSI
BAR
KPA