Perel Tools LEDA3001xx-xP Mode D'emploi page 8

Projecteur led pour l'extérieur avec capteur pir
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
LEDA3001xx-xP/3002xx-xP/3003xx-xP/3005xx-xP
holes in mounting supports, do not change the location of the
connections...
 Mechanically moving parts must not show any signs of wear and
tear.
 The electric power supply cables must not show any damage.
Have a qualified technician maintain the device.
 If the protective glass [3] is damaged, disconnect the lamp
immediately from the mains. Have it repaired immediately by a
qualified technician. Do not use the lamp with a cracked or broken
protective glass.
 This luminaire does not have a built-in device to disconnect it from
the electric mains. Make sure to electrically isolate the luminaire
before installation or maintenance activities are performed.
 Wipe the device regularly with a moist, lint-free cloth. Do not use
alcohol or solvents.
 There are no user-serviceable parts.
 Contact your dealer for spare parts if necessary.
9.
Technical Specifications
body colour
LEDA300xxx-BP
LEDA300xxx-GP
LEDA300xxx-WP
electrical data
power LED module
LEDA3001xx-xP
LEDA3002xx-xP
LEDA3003xx-xP
LEDA3005xx-xP
total nominal power
LEDA3001xx-xP
LEDA3002xx-xP
LEDA3003xx-xP
LEDA3005xx-xP
nominal voltage driver
nominal voltage LED module
power factor
LEDA3001xx-xP
LEDA3002xx-xP
V. 03 – 16/02/2016
black
grey
white
1 x 10 W COB Epistar
1 x 20 W COB Epistar
1 x 30 W COB Epistar
1 x 50 W COB Epistar
12.5 W
22.5 W
32.5 W
54 W
230 VAC
30-36 V
0.6
0.6
8
©Velleman nv

Publicité

Table des Matières
loading

Table des Matières