Quick Use Guide - Symphonic CWF804 Guide D'utilisation

1
Connections
Please refer to "Basic TV
Connection" on the front page
before you use this unit.
RF Output Channel
If channel 3 is already occupied for
broadcasting,
1)Set your TV to channel 4.
2)Insert a pre-recorded tape into this
unit.
3)Press the OUTPUT button on the
DVD/VCR so that the VCR OUTPUT
light is lit.
• If noise appears on the TV screen,
press the VCR/TV button on the
remote control.
4)Press the PLAY button once.
5)After a few seconds, press the PLAY
button on the DVD/VCR for 3 sec-
onds.
• The RF output channel will change
to channel 4 from channel 3 and you
will see a playback picture.
• When a picture does not appear on
the TV screen, repeat step [4].
6)Press the STOP button to stop play-
back.
2
Installing the Batteries
for the Remote Control
3
1 2
3
VCR/DVD Switching
OPEN/CLOSE
TIMER REC VCR OUTPUT DVD DISC IN
POWER REW F.FWD STOP/EJECT PLAY REC /OTR CHANNEL SKIP/REV STOP PLAY FWD/SKIP
VIDEO AUDIO
VCR button
DVD button
OUTPUT
VCR DVD
SKI
DVD OUTPUT
light
OUTPUT button
VCR OUTPUT
light
VCR MODE
Press the VCR button on the remote
control.
(Verify that the VCR OUTPUT light is lit.)
DVD MODE
Press the DVD button on the remote
control.
(Verify that the DVD OUTPUT light is lit.)
Note
• Pressing only the OUTPUT button on
the front panel DOES NOT switch the
mode of the remote control. You
MUST select the correct mode on the
remote control.
All manuals and user guides at all-guides.com

Quick Use Guide

4
Turn on the unit for the
first time
VCR
VCR VCR
1
1
Turn on the TV and set it
to channel 3.
• If channel 3 is already occupied for broadcasting,
see"RF Output Channel" section.
2
2
POWER
Remote Control
or
3
3
Do you connect the cable from the cable box or
the satellite box to the DVD/VCR's ANT IN jack?
YES
Y es
Y es
Press the MENU
button to exit
No
OPEN/CLOSE No
Please wait for a few minutes.
POWER
/EJECT
SPEED AUDIO
1 2 3
After scanning...
SKIP/CH.
4 5 6
VCR/TV
7 8 9
SLOW • The tuner stops on the lowest memorized
0 +10
DISPLAY VCR DVD PAUSE
channel.
PLAY • You can select only the channels memo-
STOP
rized in this unit by using the CHANNEL
REC/OTR
buttons.
MENU ENTER
SETUP TOP MENU RETURN
MODE V.SURR. SEARCH CLEAR/
MODE C. RESET
SUBTITLE
ANGLE REPEAT A-B
T-SET
– 25 –
5
VCR VCR
1
1
TV Screen
2
2
LANGUAGE SELECT
B ENGLISH [ON]
FRANCAIS
ESPAÑOL
3
3
CH 01
AUTO SET UP
4
4
NO
5
5
6
6
7
7
8
8
Clock Set Up
VCR
-MENU-
MENU
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
B CLOCK SET
LANGUAGE SELECT
• If the clock is not set, the
or
CLOCK SET screen
appears when you press
the MENU button. In this
case, go to step [2].
CLOCK SET
MONTH DAY YEAR
or
0 3 / – – – – – –
HOUR MINUTE AM/PM
– – : – – – –
Select the current month
CLOCK SET
MONTH DAY YEAR
0 3 / 1 5 – – – –
or
HOUR MINUTE AM/PM
– – : – – – –
Select the current day
CLOCK SET
MONTH DAY YEAR
0 3 / 1 5 2 0 0 4
or
HOUR MINUTE AM/PM
– – : – – – –
Select the current year
CLOCK SET
MONTH DAY YEAR
0 3 / 1 5 MON 2 0 0 4
or
HOUR MINUTE AM/PM
0 5 : – – – –
Select the current hour
CLOCK SET
MONTH DAY YEAR
0 3 / 1 5 MON 2 0 0 4
or
HOUR MINUTE AM/PM
0 5 : 4 0 – –
Select the current minute
CLOCK SET
MONTH DAY YEAR
0 3 / 1 5 MON 2 0 0 4
or
HOUR MINUTE AM/PM
0 5 : 4 0 P M AM
B PM
Select "AM" or "PM"
To exit the CLOCK SET
screen.
EN