Mellerware Homy! Instructions page 7

guarantee and the manufacturer's
liability null and void.
Description
A – Air outlet
B – Thermostat
C – Power II
D – Power I
E – Fan
F – OFF
If the model of your appliance does
not have the accessories described
above, they can also be bought
separately from the Technical
Assistance Service.
Instructions for use
BEFORE USE
Make sure that all products'
–
packaging has been removed.
Some parts of the appliance
–
have been lightly greased.
–
appliance is used a light smoke
may be detected. After a short
time, this smoke will disappear.
–
the appliance when used for the
have it on at full power for 2 hours
in a well-ventilated room.
USE
Extend the cable completely
–
before plugging it in.
Connect the appliance to
–
the mains.
Start the appliance by using the
–
power selector knob.
Select the desired power.
–
Turn the thermostat knob (B) until
–
it is in the position that corresponds
to the desired temperature.
During the use of the appliance, it
–
will switch on and off automatically,
thus indicating the operation of the
heating elements to maintain the
desired temperature.
Fan function: select the fan position
–
(E) and check that the thermostat is
set to the maximum.
ONCE YOU HAVE FINISHED USING
THE APPLIANCE
Select the minimum position (MIN)
–
using the thermostat control.
Stop the appliance, selecting
–
position OFF on the selector control.
Unplug the appliance from
–
the mains.
Clean the appliance.
–
ANTI-TIPPING SAFETY DEVICE
The appliance has an anti-tipping
–
working position is not the
correct one.
EN ES