decorflame QCM870P-36BDW Manuel D'instructions page 6

All manuals and user guides at all-guides.com
A S S E M B LY I N S T R U C T I O N S
NOTE: If the KD SCREW(S) do not fit during
assembly, loosen the 2 screws to adjust the
PLASTIC CONNECTOR until the PANELS/KD
SCREWS can be installed.
Step 2: Attach the SIDE PANEL [H] to the LEFT
FRONT PANEL [D] with 3 KD SCREWS. Attach
the other SIDE PANEL [J] to the RIGHT FRONT
PANEL [E] with 3 KD SCREWS. See Fig. B.
Step 3: Attach the LEFT and RIGHT SIDE PANELS
[D, H, E and J] to the BASE [B] using 4 KD
SCREWS. (2 screws for each side) See Fig. C
Step 4: Attach the LEFT SMALL PANEL (F)
to the LEFT FRONT PANEL (D) with 2 KD
SCREWS. Attach the RIGHT SMALL PANEL
(G) to the RIGHT FRONT PANEL (E) with 2
KD SCREWS. See Fig. D
fig. B
Step 5: Attach the FRONT PANEL (C ) to the
LEFT AND RIGHT FRONT PANEL (D and E)
with 4 KD SCREWS (2 screws on each side).
See Fig. E
fig. C
Step 6: Install the TOP PANEL (A) to the unit
as shown and attach with 3 KD SCREWS.
See Fig F
6
fig. D
fig. E