Publicité
2. Installation
FIG.2
FIG.1
Step 1
Mount the fixture to any metal 1/2" NPS female threaded connection (supplied by others) and securely
attach via the 1/2" Lock Nut (FIG.1). Please mount the fixture prior to making wiring connections.
Step 2
Open the back cover by using the provided tool to loosen the security closure screw (FIG.1), hold and
compress fixture lightly while depressing the cover opening latch. Make any dimming adjustments via
the dimmer knob (FIG.2) and if the photocell is to be used make sure the switch is on the "YES" position
(FIG.2).
Step 3
Close the back cover and tighten the security closure screw using the provided tool to approx. 10 ft lbs.
3. Electrical Connections
Step 1
Make the necessary wiring connections (FIG.3).
FIG.3
After installation, please
➢ Ensure the lighting fixture is firmly secure to its mount.
➢ Ensure wires are connected correctly before applying power.
To complete installation, turn power ON, check for proper operation of luminaire.
ILP – Industrial Lighting Products, LLC
519 Codisco Way, Sanford, FL 32771
Phone: (407) 478 3759 Fax: (407) 478 3760
www.ilp-inc.com
Publicité
