ILP CFS-36W-U Serie Instructions D'installation

MODEL:
CFS-36W-U-XX
(Note: Replace XX with 40 or 50 based on CCT of LED, may be followed by BLK, BRZ, or WHT)
Model number list:
Item
1. Introduction
◼
This LED Flood uses the latest in lighting technology for long life, low maintenance,
and easy adaptability.
◼
This driver allows operation on nominal 120V-277V, 50-60Hz AC supply without any variation in
light output.
◼
Suitable for use in the following locations:
• Min. Ambient Temp: -22°F (-30°C)
• Max Ambient Temp: 104°F (+40°C)
• Suitable for mounting in Wet Locations
• Suitable for mounting within 1.2m (4 ft.) of the ground.
Warning:
To avoid the risk of fire, explosion, or electric shock, this product shall be installed, inspected,
and maintained by a qualified electrician, in accordance with all applicable electrical codes.
Warning:
To avoid electric shock:
•Allow product to cool before servicing.
•Be certain electrical power is OFF before and during installation or maintenance.
•Luminaire must be connected to a wiring system with equipment-grounding conductor.
Warning:
To avoid explosion:
•Make sure the supply voltage is the same as the rated luminaire voltage.
•Do not operate in ambient temperatures above those indicated for the luminaire.
Model
A CFM-36W
ILP – Industrial Lighting Products, LLC
519 Codisco Way, Sanford, FL 32771
Phone: (407) 478 3759 Fax: (407) 478 3760
INSTALLATION INSTRUCTIONS
Input Voltage Input Watts
120-277VAC
www.ilp-inc.com
36W CONVERTAFLOOD
Weight
36W 4.8 lbs.