Publicité
English
IMPORTANT
SAFETY
INSTRUCTIONS
For indoor use only.
Regularly check the cord, the
transformer and all other parts for
damage. If any part is damaged the
product should not be used.
Important information! Keep these
instructions for future use.
CAUTION!
The light source of this product is non-
changeable light diodes (LED).
Do not disassemble the product, as the
light diodes can cause damage to the
eyes.
Do not immerse in water.
Cleaning
Use a damp cloth, never a strong
cleaning agent.
2
English
CAUTION
To reduce the risk of fire, electric
shock, or injury to persons: Use only
insulated staples or plastic ties to
secure cords. Route and secure cords
so that they will not be pinched or
damaged when the cabinet is pushed
to the wall. Position the portable
cabinet light with respect to the
cabinet so the lamp replacement
markings can be read during
relamping. Not intended for recessed
installation in ceilings, or soffits. The
low-voltage portable cabinet light may
be installed inside or under a kitchen
cabinet or other built-in furniture
when:
1. The low-voltage Class 2 power supply
is located outside the cabinet and is
not concealed; and
2. The line voltage power supply
cord is not concealed or run through
openings in the cabinet, walls, ceilings,
or floors. This requirement does
not apply to the wiring between the
cabinet light and the power unit. The
National Electric Code (NEC) does
not permit cords to be concealed
where damage to insulation may go
unnoticed. To prevent fire danger, do
not run cord behind walls, ceilings,
soffits, or cabinets where it may
be inaccessible for examination.
Cords should be visually examined
periodically and immediately replaced
when any damage is noted.
AA-2106616-3
Publicité
