Using The Device - Fora Diamond Nexus Manuel De L'utilisateur

PERFORM THE TEST

Using the Device

As a Body Measurement Thermometer
14
1. Touch Auto-sense Power Switch
for 2 seconds to turn on the
thermometer first.
2. Press the Mode button to
select Body mode.
The temperature unit flashes.
3. Move the probe close to the
forehead.
Make sure the probe is flat and close
to the forehead, not at an angle.
Perform a forehead measurement
with a distance within 2 cm. The
meter will take measurement
automatically with the blue LED
blinks.
4. Read the result.
The measurement result will be
done in 3 seconds.
The reading is shown together with
green LED and three short beeps.