Operation; Device Elements; Setting The Language; Selecting A Washing Programme - Kärcher Professional CR 214 Mode D'emploi

Device elements

1 Touchscreen
2 Emergency-stop button

Operation

Note:
Operation is described without the special
function "Drive-In".
If the washing bay is ready for operation,
the following messages appear on the
touchscreen:

Setting the language

 Press flag.
 Next language appears.

Selecting a washing programme

Enter the PIN code via the keyboard
The washing programme selected with the
purchase can be started.
 Read the code number from your re-
ceipt and enter it via the keyboard on
the touchscreen.
After the entry the following message ap-
pears:
The receipt was valid for one wash.
– Then the display asks you to position
the vehicle (see "Positioning the vehi-
cle").
The receipt is valid for several washes.
– Then the display asks you to position
the vehicle (see "Positioning the vehi-
cle").
Typing error or the receipt has already
been used.
The receipt is only valid on a certain week
day.
The receipt is only valid in one or two time-
periods.
2
-
EN

Positioning the vehicle

 Drive the vehicle in the washing plant
and position it in accordance with the
prompts of the positioning light.
 Drive the vehicle forwards in the wash-
ing plant and position it in accordance
with the prompts of the positioning light.
 Please drive back until light shows stop.
The vehicle is correctly positioned in the
washing plant.

Starting the washing programme

 Press the "Start" button on the touch-
screen.
Note:
On some washing bay versions, the wash-
ing programme starts automatically. In
such cases, the window is not displayed.
11