Table des Matières
Publicité
DPA260 SOFTWARE
NOTE: If a connection is established between DPA260 controller and PC/Software via USB or RS485, all the controls on the front panel of the
controller are locked.
1. Opening controller presets stored on a storage medium.
2. Backing up modified and newly created controller presets on a storage medium.
3. Transferring presets to the DPA260 controller. Up to 24 controller presets can be stored on a DPA260 unit.
4. Displaying controller presets from the DPA260.
5. Copying the settings of one input channel to another.
6. Copying the settings of one output channel to another.
7. Configuring the crossover function of the DPA260 controller (2 x 2-WAY XOVER + SUB, 2 x 3-WAY XOVER, 6 WAY XOVER)
8. Locking the output channels in the software. If the lock function is activated, it is possible to make changes in the input channels (software).
9. Locking the DPA260 controller (6-digit password). The lock on the controller remains active even after quitting the software and separating
the connection to the PC and can only be released with the help of the software or the unlock function of the DPA260 controller.
10. Renaming the DPA260 controller.
11. Renaming the input and output channels.
12. Separating the software connection from the DPA260 controller.
13. Displaying the individual input and output channels, gain and delay settings and the overview.
14. Graphical representation of the EQ settings of the selected channels.
15. Displaying the EQ cursor of the selected channel.
16. Determining whether or not only the equalizer settings of the output channels, or of the input and output channels are summed and
graphically displayed.
17. Setting the Gain and display adjustment of the selected channel.
18. Muting the selected channel.
19. Inverting the polarity of the selected channel.
20. Setting the Delay adjustment of select channel (0 ms, 0,02 ms...848,998 ms / 0 m, 0,0068 m...288,65932 m).
21. Setting the input source of the selected channel.
22. Setting the high-pass filter of the selected channel.
23. Setting the low-pass filter of the selected channel.
24. 7-band equalizer of the selected output channel (5-band EQ in the input channels).
25. Setting the equalizer characteristic.
26. Resetting the equalizer settings of the selected channel.
27. Setting the Limiter settings of the selected channel.
28. Button for linking both input channels.
29. Button for linking both output channels.
SPECIFICATIONS
Model Name:
Product Type:
Type:
Version:
AD/DA Converter:
Sampling Frequency:
Frequency Response:
Filter Type:
Filter Slew Rate:
Delay (In- and output channels)
Dynamic Range:
S/N ratio:
THD:
Channel Crosstalk:
Max. Input Level:
LDDPA260
DSP controller
digital
6-channel
24-bit
48 kHz
20 - 20,000 Hz
Butterworth, Bessel, Linkwitz-Riley
6, 12, 18, 24 dB/octave
0 ms, 0,02 ms...848,998 ms / 0 m, 0,0068 m...288,65932 m
111 dB (A weighted)
>106 dB
< 0.005%
107 dB (+ 20 dBu @ 1 kHz)
+20 dBu (balanced)
11
Publicité
Table des Matières
