Inserting Or Exchanging Battery; Nose And Ear Trimmer Operation; Beard Trimmer Operation - Unold Premium Serie Notice D'utilisation

InSertIng Or exchangIng Battery

1. Switch the appliance off using the „EIN/
AUS" [ON/OFF] switch.
2. Turn the battery compartment cover to open.
3. Detach the battery compartment cover from
the appliance.
4. Remove the empty battery.
5. Insert a 1.5 V Mignon battery in the bat-
tery compartment. Make sure the poles

nOSe anD ear trImmer OPeratIOn

1. Prepare the appliance as described in the
chapter „Before first use".
2. Remove the protection cap from the
appliance.
3. Check if the nose and ear trimmer
attachment is attached to the appliance.
4. Switch the appliance on using the „EIN/
AUS" [ON/OFF] switch.
5. Move the attachment carefully and slowly
towards or into the nose or ear.
6. Please bear in mind that the appliance
should never be inserted more than 5 mm

BearD trImmer OPeratIOn

To obtain perfect results, always work against the direction of hair growth. Shaving will be easier if
you tense the skin of the part you want to shave with your free hand. After shaving we recommend
to cream the depilated parts with a mild body lotion in order to avoid skin irritation. If you have
sensitive skin or depilate sensitive parts, we recommend you to treat these parts only once in order
to avoid skin irritation.
1. Prepare the appliance as described in the
chapter „Before first use".
2. Remove the protection cap from the appli-
ance.
3. Check if the beard trimmer attachment is
attached to the appliance.
4. Switch the appliance on using the „EIN/
AUS" [ON/OFF] switch.
5. Carefully place the appliance on the skin
and cut the hair to the desired length. Do
not use pressure on the appliance.
6. Contour trimming: Carefully cut the hair
according to the desired contour.
7. Make sure that the shaving head is always in
contact with the skin. Shaving will be easier,
when you tense the skin with your free hand.
12
All manuals and user guides at all-guides.com
6. Reattach the battery compartment cover
7. Used batteries must not be disposed of
7. Slowly move the appliance in circles to
8. After finishing the hair cut, switch the
9. Clean the appliance after every use.
10. Reattach the protection cap and store all
8. If hair gets caught in the shaving head,
9. After finishing the hair cut, switch the
10. Clean the appliance after every use.
11. Directly after shaving do not use any care
12. Reattach the protection cap and store all
are correctly orientated as otherwise the
appliance will not work.
and turn to close.
in the household waste. Dispose of the
batteries at your specialist dealer for electric
devices or the local collection point.
in nose or ear to avoid injuries. Do not force
the appliance when inserting it.
remove all unwanted hair.
appliance off pushing the button EIN/AUS
[ON/OFF].
parts in the appliance holder.
switch the appliance off and clean the
shaving head as described in the chapter
„Cleaning and care".
appliance off pushing the button EIN/AUS
[ON/OFF].
products that contain alcohol as these may
cause skin irritation. Use mild care lotions
or creams instead.
parts in the appliance holder.