The Main Screen In Detail; Giving In A Destination - CarTrek 400 Guide D'utilisation

. The main screen in detail

• The big red arrow on the bottom left of your
screen with the grey/light blue background
(the info area) indicates your next driving
instruction. Under the red arrow is a distance
indicator that indicates when to follow this next
driving instruction.
• The screen furthermore shows the estimated
time to your destination. It also indicates the
total driving distance to your destination. In
addition, you will see a speedo meter. You will
see this information at the top of your screen.
• In the bottom of the screen, in the grey
transparent area, you can read the next driving
instruction. Just above that is your current
position. In the bottom of your screen, in the
black area, you will alternatively see your
current position and your chosen destination.
• To increase or decrease the scale of the map,
click the "+" button on the device (zoom in) or
the "–" button (zoom out).
• If you switch off the sound (see section 20)
by clicking on the button with the audio
Cartrek 400 Software manual
speaker on the right of the screen, you will see
a "sound off" indicator (a little red cross). You
will not hear any voice instructions when you
see this indicator.
• If you ignore an instruction, the devive will
recalculate your route. An indicator in the
top end of the screen indicates that the device
is recalculating the route. This indicator always
shows when the device is calculating its
initiary route, or when it is recalculating (a
green loading indicator).
• To go to the Quick pick menu, you can
always click in the middle of the map. To go
back to the map, you can click on "back".
• If you click on the grey area at the bottom
of the screen, you will hear the last spoken
instruction, if still available.

5. Giving in a destination

• In the Quick pick menu, click on 'Routing' to
enter your destination and start the navigation.
You will then have five options which represent
possibilities to create routes.
1