Control Unit; Description Of The Functions - Skytec TEC-2800 Mode D'emploi

All manuals and user guides at all-guides.com

CONTROL UNIT

DESCRIPTION OF THE FUNCTIONS

1. OPEN/CLOSE
Opens and closes the CD drawer. This button only operates in pause or stop mode.
2. TIME/STOP
To change the time indication on the display. You can choose among elapsed, remaining or total playing
time of a CD. If the button is pressed for more than 3 seconds, the STOP function is activated and the total
number of tracks and the total playing time of the inserted CD is displayed.
3. CONTINUE/SINGLE button
This button lets you select one of the following three playing modes:
a) auto-cue single, all tracks are played but at the beginning of each track the player stops and switches into
PAUSE mode.
b) continue, the whole CD is played continuously.
c) outro, the player plays the last 30 seconds of each track. Activate this function by pressing the button
down for more than 3 seconds. This function is switched off by pushing the Time/Stop button.
The functions a, b and c are indicated on the display.
4. LIQUID CRYSTAL DISPLAY
Indicates the track number, the playing time and other functions. A long horizontal bar represents the
remaining play time. The bar flashes over its whole length during the last 30 seconds of a track.
5. MT button
If this button is pressed, the tone level is brought back to the original tone (Master Tempo ). The slider
control (11) only sets the speed.
6. PITCH button
This button sets the maximum speed variation that is adjustable by the slider control (11). ( plus or minus 8,
16, 32 or 100%)
7. RELAY button This button exists only once!
When this function is activated, the red LED is flashing and the unit switches automatically between the
- 9 -