Battery Replacement - PowerTap P1 Guide De Démarrage Rapide

6. BATTERY REPLACEMENT

To install or replace the battery use a
6mm hex to remove the batter cover.
Replace battery in clean/dry conditions.
Remove old battery if necessary and
replace with new battery. Reference
underside of pedal for correct battery
orientation. Reinstall battery cover and
do not overtighten.
IMPORTANT:
Ensure the o-ring
clears the outer
edge of the battery
compartment during
installation.
6
7. PRECAUTIONS
Avoid submerging pedals in water and
direct high pressure water spray. Damag-
ing chemicals like diesel, kerosene and
other strong solvents are also potentially
damaging.
WARNING: Keep pedals away from
strong magnets.
Some of the electronics inside the pedal
are sensitive to strong magnets. If your
pedals come in close contact with strong
magnets they may begin transmitting
abnormal data. If you think your pedals
were exposed to the magnetic field of a
strong magnet please contact customer
service.