Drain Hose - EAS ELECTRIC EMW7440GW Guide D'utilisation

INSTALLATION
Connect the other end of inlet pipe to the inlet valve at the backside of
product and fasten the pipe tightly clockwise.
water inlet valve

Drain Hose

Warning!
！ ！
Do not kink or protract the drain hose.
Position drain hose properly, otherwise damage might result of water
leakage.
There are two ways to place the end of drain hose:
1.Put it into the water trough.
Water
trough
Note!
If the machine has drain hose support, please install it like the following.
Warning!
！
When installing drain hose, fix it properly with a rope.
If drain hose is too long, do not force it into washing machine as it will
cause abnormal noises.
water supply hose
2.Connect it to the branch drain pipe
of the trough.
Trough
Hose Retainer
Max.100cm
Min.60cm
V.2