Remote Control Function - Power Dynamics PDC-60 Manuel D'instructions

Remote Control Function:

13. TIME
Use this button to choose the time mode : elapsed time, remaining time or total remaining time.
14. RELOOP
This button will start the last saved loop. To end the loop, press again.
15. PITCH
By pushing this button, the adjustment of the pitch potentiometer becomes available.
16. RANDOM
Press this button to play a random track.
17. REPEAT
Use this button to repeat just one track or all the tracks.
18. CUE
By pressing this button, play returns to the position at which play was started.
19. PROGRAM
Press to enter the program mode.
20. PLAY / PAUSE
Press this button to start or pause play.
21. NEXT
Press this button to select the next track.
22. PRESET
Press this button to save a channel/station (preset).
23. INFO
Switch to show different type of displaying information for the current playing channel (CD-Player Function, 24).
24. TU+
Use this button to search for a channel/station on a higher frequency.
25. Pre –
Use this button to select a lower numbered preset channel/station.
1. EJECT
Open or close the disk tray.
2. LOOP IN, LOOP OUT
IN button sets the beginning of the loop. OUT button sets the end point of the
loop and starts the loop. To finish the loop press the OUT button again.
3. PITCH - , PITCH +
The pitch will drop when the – button is pressed and rise when the + button
is pressed. The pitch will return to the original value when button is released.
4. SINGLE
Press this to switch between the SINGLE and CONTINUOUS play mode.
The selected mode is indicated on the LCD.
5. FOLDER
Press to open the folder map from USB.
6. PREV
Press this button to select the previous track
7. MENU
Press this button to open the menu.
8. PRE +
Use this button to select a higher numbered preset channel/station.
9. TU –
Use this button to search for a channel/station on a lower frequency.
10. ENTER
Press this button to confirm your inputs.
11. DAB+ / FM
Press this button to choose radio modes: DAB+ or FM.
12. CD / USB
Press this button to choose between CD and USB function.
6