Bodypack Transmitter - Power Dynamics 179.126 Manuel D'instructions

BODYPACK TRANSMITTER

30. Antenna.
31. Power Button
32. Input Connector: It is TA3 PINS connector; It is suitable for the lavaliere microphones
system/ Headset microphone systems.
33. Lavalier/Headset audio level switch
IR-------------IR SETTING
Turn on the transmitter and the receiver, set the desired channel or the desired frequency on the
receiver. Keep the transmitter + / - 10cm from the IR LED on the receiver, press the IR button,
onto the display "SEND" will flash three times. If a connection is established "Auto" will be
continuously lit and the RF signal display will display the strength of the signal. If not, you should
try it again!