Sony MDR-1RBT Guide De Référence

Wireless
Stereo Headset
Casque
stéréo sans fil
MDR-1RBT
©2012 Sony Corporation Printed in China
http://www.sony.net/
English
WARNING
To reduce the risk of electrical shock, do not open the
cabinet. Refer servicing to qualified personnel only.
Do not install the appliance in a confined space, such as a bookcase
or built-in cabinet.
Do not expose the batteries (battery pack or batteries installed) to
excessive heat such as sunshine, fire or the like for a long time.
Excessive sound pressure from headphones can cause hearing loss.
Information
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful
communication.
This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment and meets RSS-102 of the IC
radio frequency (RF) Exposure rules. This equipment has very low
levels of RF energy that are deemed to comply without testing of
specific absorption ratio (SAR).
This Class B digital apparatus complies with Canadian ICES-003.
The Bluetooth word mark and logos are owned by the Bluetooth
SIG, Inc. and any use of such marks by Sony Corporation is under
license.
The N Mark is a trademark or registered trademark of NFC Forum,
Inc. in the United States and in other countries.
Microsoft, Windows and Windows Vista are registered trademarks
or trademarks of Microsoft Corporation in the United States and/or
other countries.
Macintosh and Mac OS are trademarks of Apple Inc., registered in
the U.S. and other countries.
Other trademarks and trade names are those of their respective
owners.
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are recyclable.
You can help preserve our environment by
returning your used rechargeable batteries to the
collection and recycling location nearest you.
For more information regarding recycling of
rechargeable batteries, call toll free
1-800-822-8837, or visit http://www.rbrc.org/
Caution: Do not handle damaged or leaking Lithium-Ion
batteries.
Reference Guide
Guide de référence
Precautions
On Bluetooth communication
 Bluetooth wireless technology operates within a range of about
10 meters (about 30 feet).
Maximum communication range may vary depending on
obstacles (human body, metal, wall, etc.) or electromagnetic
environment.
 The antenna is built into the unit as illustrated in the dotted line.
The sensitivity of the Bluetooth communication will improve by
turning the direction of the built-in antenna to the connected
Bluetooth device.
The communication distance shortens when the obstacles are
between the antenna of the connected device and this unit.
Location of
built-in antenna
 The following conditions may affect the sensitivity of Bluetooth
communication.
– There is an obstacle such as a human body, metal, or wall
between this unit and Bluetooth device.
– A device using 2.4 GHz frequency, such as a wireless LAN
device, cordless telephone, or microwave oven, is in use near
this unit.
 Because Bluetooth devices and wireless LAN (IEEE802.11b/g) use
the same frequency, microwave interference may occur and
resulting in communication speed deterioration, noise, or invalid
connection if this unit is used near a wireless LAN device. In
such a case, perform the following.
– Use this unit at least 10 m (about 30 ft) away from the wireless
LAN device.
– If this unit is used within 10 m (about 30 ft) of a wireless LAN
device, turn off the wireless LAN device.
– Install this unit and Bluetooth device as near to each other as
possible.
 Microwaves emitting from a Bluetooth device may affect the
operation of electronic medical devices. Turn off this unit and
other Bluetooth devices in the following locations, as it may cause
an accident:
– where inflammable gas is present, in a hospital, train, airplane,
or a petrol station
– near automatic doors or a fire alarm
 This unit supports security capabilities that comply with the
Bluetooth standard to provide a secure connection when the
Bluetooth wireless technology is used, but security may not be
enough depending on the setting. Be careful when
communicating using Bluetooth wireless technology.
 We do not take any responsibility for the leakage of information
during Bluetooth communication.
 Connection with all Bluetooth devices cannot be guaranteed.
– A device featuring Bluetooth function is required to conform to
the Bluetooth standard specified by Bluetooth SIG, Inc. and be
authenticated.
– Even if the connected device conforms to the above mentioned
Bluetooth standard, some devices may not be connected or
work correctly, depending on the features or specifications of
the device.
– While talking on the phone hands free, noise may occur,
depending on the device or communication environment.
 Depending on the device to be connected, it may require some
time to start communication.
Others
 Do not place this unit in a place exposed to humidity, dust, soot
or steam, subject to direct sunlight, or in a car waiting at a traffic
signal. It may cause a malfunction.
 Using the Bluetooth device may not function on mobile phones,
depending on radio wave conditions and location where the
equipment is being used.
 If you experience discomfort after using the Bluetooth device,
stop using the Bluetooth device immediately. Should any problem
persist, consult your nearest Sony dealer.
 Listening with this unit at high volume may affect your hearing.
For traffic safety, do not use this unit while driving or cycling.
 Do not put weight or pressure on this unit as it may cause the
GB
unit to deform during long storage.
 Do not subject the unit to excessive shock.
 Clean the unit with a soft dry cloth.
FR
 Do not expose the unit to water. The unit is not waterproof.
Remember to follow the precautions below.
– Be careful not to drop the unit into a sink or other container
filled with water.
– Do not use the unit in humid locations or bad weather, such as
in the rain or snow.
– Do not get the unit wet.
If you touch the unit with wet hands, or put the unit in a damp
article of clothing, the unit may get wet and this may cause a
malfunction of the unit.
 The earpads may deteriorate due to longterm storage or use.
 If you have any questions or problems concerning this unit that
are not covered in this manual, please consult your nearest Sony
dealer.
Specifications
General
Communication System
Bluetooth Specification version 3.0
Output
Bluetooth Specification Power Class 2
Maximum communication range
Line of sight approx. 10 m (30 ft)*
1
Frequency band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method
FHSS
Compatible Bluetooth Profiles* 2
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
HFP (Hands-free Profile)
HSP (Headset Profile)
Supported Codec*
3
SBC* 4 , AAC* 5
Supported content protection method
SCMS-T
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
Included items
Wireless stereo headset (1)
micro-USB cable (approx. 50 cm (1.64 ft)) (1)
Connecting Cord (approx. 1.5 m (4.92 ft)) (1)
Carrying pouch (1)
Reference Guide (this sheet) (1)
Recommended accessory
USB Charging AC Power Adaptor: AC-UD10 (sold separately)
* The actual range will vary depending on factors such as obstacles
1
between devices, magnetic fields around a microwave oven,
static electricity, reception sensitivity, antenna's performance,
operating system, software application, etc.
* Bluetooth standard profiles indicate the purpose of Bluetooth
2
communication between devices.
* Codec: Audio signal compression and conversion format
3
* 4 Subband Codec
* Advanced Audio Coding
5
Wireless Stereo Headset
Power source
DC 3.6 V: Built-in lithium-ion rechargeable battery
Mass
Approx. 297 g (10.48 oz)
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Usage hours
Communication time (including music playback time):
Approx. 30 hours
Standby time: Max. 200 hours
Charging time
Approx. 6 hours
Charging temperature
5 °C to 35 °C (41 °F to 95 °F)
Receiver
Type
Closed, Dynamic
Driver units
40 mm
Frequency response
4 Hz – 80 kHz
Microphone
Type
Electret condenser
Direction characteristic
Omni directional
Effective frequency range
100 Hz – 4,000 Hz
System requirements for battery
charge using USB
Personal Computer with pre-installed with any of the following
operating systems and USB port:
Operating Systems
(when using Windows)
®
Windows 7
Home Basic / Home Premium / Professional / Ultimate
®
Windows Vista (Service Pack 2 or later)
Home Basic / Home Premium / Business / Ultimate
®
Windows XP (Service Pack 3 or later)
Home Edition / Professional / Media Center Edition 2004 /
Media Center Edition 2005
(when using Macintosh)
Mac OS X (version.10.3 or later)
Design and specifications are subject to change without notice.