ALPATEC VT 30 Notice D'utilisation page 14

All manuals and user guides at all-guides.com
notice VL-VP:notice VLP 16 23/09/11 9:59 Page 14
USING
- Plug the appliance.
- VT 23:
Turn the speed selector button to desired position :
Position 1 : low speed
Position 2 : high speed
- VT 30 / VT 40 / VP 40:
Turn the speed control switch to desired position :
Position 1 : low speed
Position 2 : medium speed
Position 3 : high speed
- Turn the speed selector button or rotated switch (according to the model) to 0 position to switch off the
appliance.
HIGH SETTING: only for VP 40 model
Unscrew the lock nut, adjust the desired height and tighten the nut.
TILT SETTING:
You can adjust the head of the fan to your desired angle by moving the air circulator up and down.
OSCILLATION:
- Press oscillation knob downwards to activate oscillation.
- Pull-up oscillation knob to stop oscillation.
14