Europet Bernina CALL-O-MATIC Instructions De Service page 10

NOTE:
the automatic pet feeder supplies the meals in the following order:
Food bowl 1 = meal # 1
Food bowl 2 = meal# 2
Food bowl 3= meal# 3
Food bowl 4= meal# 4
If you only want to use one food bowl fi ll in food bowl# 1, if you want to use two food bowls fi ll in food bowl # 1 and #2 etc.
The programming can be changed any time – the momentary programming will be replaced immediately.
Turning the master switch "OFF"( on the bottom side off the automatic pet feeder) deletes the clock time setting – reprogramming will be necessary.
Changing the batteries deletes the clock time setting – reprogramming will be necessary.
(C.) Manual Feeding
In between the programmed meals you can NOT open the food bowls by hand.
(D.) Assembly and Cleaning of the Automatic Pet Feeder
The CALL-O-MATIC should be cleaned regularly – especially when using wet food the pet feeder should be cleaned regularly.
Loose parts as lid, food bowl and adapters are suitable for the dishwasher.
The automatic pet feeder should not be washed under running water or dipped into water because the sensitive electronics could be damaged irreparably – only use wet cloth.
The cooler-pack included in the scope of delivery and the batteries are NOT suitable for the dishwasher – use wet cloth for cleaning.
As already mentioned the CALL-O-MATIC can be used for wet, dray, as well as liquid pet food and water.
In the scope of delivery 4 meal bowls, each 500ml, are standard setting as well as 2 adapter bowls for canned pet food and 2 for the reduction of the meal bowls, each 200 ml. By these
fi ttings and the additional water bowl beneath the coverage you can supply your pet with divers feeding possibilities.
The following options are possible:
4 standard meal bowls, each 500ml
- suited for wet, dry, as well as liquid pet food and water
- suited for dogs and lager cats
2 reduction meal bowls, each 200 ml
- suited for wet, dry, as well as liquid pet food an water
- suited for cats and smaller dogs
2 adapter meals bowls
- suited for commercially available canned pet food
Meal bowl under the coverage
Especially suited for water and liquid pet food (remove coverage before using as water bowl)
To keep wet pet food or water fresh and cool you have the possibility to use the (refrigerator chilled) cooler-pack enclosed in the scope of delivery or ice cubes.
(As a precaution do not remove coverage)
Disassembly of the Automatic Pet Feeder
1.) The master switch on the bottom side should be "OFF"
2.) Loosen the main lid (centric coverage with oval elevation) on top of the feeder
3.) Now you can see the second bowl lid which covers the bowl with 300ml content or the cooler-pack and ice cube container.
In case you want to use this bowl for a water bowl take off the main lid
4.) To get to the food bowls, with 500 ml content, take off the lid carefully
5.) Now you can take off the slide (triangle shape) to get to the 4 meal bowls (#1 -#4)
You can now place the food into the bowls or the adapters for canned pet food or the food bowl reduction adapters
When putting the slide in place be sure to insert it on the groove in the middle of the food bowl – if assembly is correct the slide should cover meal bowl # 3
6) You can take the food bowl out for cleaning. When putting it back the food bowl will lock to show meal bowl# 1 placed above the display
Assembly of the Automatic Pet Feeder
For assembly start with digit no. 6.) and go backwards to digit no. 2.).
Take care the coverage is placed correctly – align pins under coverage with holes in pet feeder
All manuals and user guides at all-guides.com
- 10 -
GB