Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
4
Operating Elements
Nipple
Sensor
5
Operation
1.
To take the temperature, put the nipple into the baby's/infant's
mouth.
2.
Press the ON/OFF switch to turn the appliance on; the display
reads 188.8
The thermometer is ready for use. The temperature computed
last is displayed as 37.0 °C (L0). °C" flashes on the display.
3.
If the ambient temperature is above 32 °C, the temperature is
shown and measuring starts.
4.
If the computed temperature is above 44 °C, the display reads
H °C.
5.
If the temperature is below 32 °C, the display reads L0 °C.
6.
When the temperature remains unchanged it is shown as °C,
°C" stops flashing, and an acoustic signal is sounded ten times.
7.
When measuring is complete remove the nipple from the baby's/
infant's mouth.
8.
Turn the appliance off to save battery power. If you do not, the ap-
pliance will turn itself off after 10 minutes. In case measuring is
interrupted, start again and repeat the above steps.
.
ON/OFF switch
LC display
Housing
19
Publicité
Table des Matières
