ARENDO 304987 Manuel page 24

Assemble the appliance as shown in the previous figure. Place the grill plate over
the drip tray and make sure that the handles (B) lock into the slots on the housing
(F).
Place the lid (A) vertically by guiding the side pin into the rear slots on the hous-
ing (F). Slightly tilt the lid (A) forward using the locking handle and then press it
downwards (see the next figure).
Then insert the thermostat (S) properly into the provided holder and connect the
mains cable to a properly installed socket.
You can now adjust the thermostat for your desired grilling program. The appli-
ance is now ready for use.
24
English