DNT MusicFly i-Select Mode D'emploi page 24

All manuals and user guides at all-guides.com
Store Frequencies as a favorite
Restore Frequencies
Press repeately the MEM/SCAN button. until the desired
frequency is shown in the display.
Adjust audio input level (Audio in)
In order to have the best signal quality, it is necessary to adjust
the volume of the connected audio device. Follow the below
guideline:
Start playback of the audio device. Adjust the volume to a low
level. Now increase the level until the noise disapears. Keep
the level in mind. Increase the level until a distortion is heard
in the radio. Keep also this level in mind. Now adjust the volume
level to the middle of these 2 values, which you have deter-
mined.
repeat the current folder
Shuffle
Setup the frequency. (page 17 Setup
fequency)
Press briefly the MEM/SCAN button. The
display shows [-].
Press the
memory adress(1-4).
Press briefly the MEM/SCAN button once
again.
- 20 -
/
-buttons to select a