sunjoe 24V-AJC-LTE Manuel De L'opérateur page 10

Masquer les pouces Voir aussi pour 24V-AJC-LTE:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Inflating with the Air Hose
The air chuck on the air hose can be used without adapters to
inflate tires or with any item with a valve stem that fits the air
chuck opening.
1. Place air chuck on valve stem (Fig. 3).
2. Push air chuck down so that the threaded section of the
valve stem is inside the air chuck (Fig. 3).
3. Clamp the end of the air chuck down onto the valve stem
by pressing air chuck clamp down until it stops or is
parallel with the air hose.
Fig. 3
Air chuck clamp
To lock
Air hose
Valve stem
4. To remove, lift air chuck clamp and remove air chuck from
valve stem (Fig. 4).
Fig. 4
To unlock
Air hose
Valve stem
Inflating with the Air Hose and Adapters
The air hose can be used with the provided adapters to inflate
a variety of items.
1. Insert adapter into air chuck and push air clamp down
until it locks into place (Fig. 5).
2. To remove, lift air chuck clamp and remove adapter from
air chuck (Fig. 5).
To unlock
Fig. 5
To lock
Air chuck
Air chuck
clamp
Air chuck
Sport ball
Air chuck
needle
Tapered
adapter
Presta valve adapter
Adapter Functions (Fig. 6)
• The tapered adapter can be used on smaller air valves to
inflate items like floats and children's toys, which usually
require the user to inflate them by blowing air into them.
• The sport ball needle can be used to inflate any type of
sports ball or any other item that requires a sport ball
needle.
• The Presta valve adapter can be used to inflate Presta valve
stem tires as shown. Before inflating a tire with a Presta
valve, loosen the locking nut to inflate. Once inflation is
complete, tighten the locking nut to seal the tire valve.
Fig. 6
Tapered
adapter
To use the Presta valve adapter:
1. Loosen Presta valve locking nut (Fig. 7).
Fig. 7
To tighten
2. Thread Presta valve adapter onto valve stem with larger
open end toward wheel (Fig. 8).
3. Clamp the end of the air chuck down onto the Presta
valve adapter by pressing air chuck clamp down until it
locks into place (Fig. 8).
4. After inflation, remove air chuck and tighten locking nut
(Fig. 7).
Fig. 8
To lock
Air chuck
clamp
Air hose
10
Sport ball
Presta valve
needle
adapter
Locking nut
To loosen
Presta valve stem
To unlock
Air chuck
Presta valve adapter
Presta valve stem

Publicité

Table des Matières
loading

Table des Matières