Cleaning The Drain Pump Filter; Cleaning The Water Inlet Filter - LG F0L2CRV2T2 Manuel Du Propriétaire

3
Close the dispenser drawer slowly.
4
Press and hold the Spin+Temp. button for 3
seconds to activate this function.
• tcL will be displayed on the display.
5
Press the Start/Pause button to start.
6
After the programme is complete, leave the
door open to dry the door opening, gasket, and
door glass.
CAUTION
• Leave the door open to dry inside of the
appliance only if the children are supervised at
home.

Cleaning the Water Inlet Filter

Water inlet filter collects lime or any small objects
that may be in water supplied to the appliance.
If the water is very hard or contains traces of
limescale, the filter on the water inlet may be
clogged.
1
Turn off the water tap and unscrew the water
inlet hose.
2
Clean the filter using a medium bristle tooth
brush.
34
NOTE
• Turn off the supply tap to the appliance if the
appliance is to be left for a certain period of time
(e.g. holiday), especially if there is no floor drain
(gully) in the immediate vicinity.
• 1E will be displayed on the control panel when
the water is not entering the detergent drawer.

Cleaning the Drain Pump Filter

The drain filter collects threads and small objects
left in the laundry. Check regularly that the filter is
clean to ensure smooth running of your appliance.
Allow the water to cool before cleaning the drain
pump filter. Open the door in an emergency or
perform a emergency evacuation.
1
Unplug the appliance.
2
Open the cover cap and pull out the hose.
3
Unscrew the drain plug a , and then drain the
water. Slowly unscrew the drain pump filter b
to drain the water and remove small objects.
EN