ThermoPro TP-55 Mode D'emploi

EN
INDOOR HUMIDITY AND TEMPERATURE MONITOR
INSTRUCTION MANUAL
Model No.: TP-55
Instruction Manual
EN
V20170526 EN FR
-1-
Magnet
Large LCD display
SIDE
Wall hanging hole
Stand
Three Touch Buttons Battery Compartment
1.Display: Displays the current humidity and temperature,
maximum and minimum humidity/temperature recorded
in the past or past 24hrs.
2.Battery Compartment: Holds 2 X AAA batteries to power
the unit.
3.Temperature range: -58 °F ~ 158°F (-50 °C ~ 70 °C).
4.Humidity range: 10% ~ 99%.
5.Temperature display unit: °C and °F selectable.
6.Temperature Resolution: 0.1 °C/°F.
7.Humidity Resolution:1%.
8.Comfort Level: DRY, COMFORT, WET.
If humidity is below 30%: Dry.
If humidity is between 30% to 60%: Comfort.
If humidity is above 60%: Wet.
9.Totally wireless tabletop, magnet-mountable and
wall-mounted design.
10.Low battery indication.
Please replace battery as soon as possible when the low
battery indicator is displayed as a low battery will make
the touch buttons less sensitive.
11.Backlight function.
-2-
Touch Buttons
°C/°F: Touch once to change the temperature display unit to
°C or °F.
< > : Touch once to turn on/off backlight.
ALL TIME/24 HRs: Touch to show the maximum and minimum
temperature and humidity recorded since last reset (ALL TIME
option) or in the past 24 hours since last reset (24 HRs option).
Please note: in 24 HRs option, the maximum and minimum
temperature and humidity will be automatically reset every 24
hours.
Touch and hold "ALL TIME/24 HRs" button for 3 seconds to
reset/clear all the maximum and minimum temperature and
humidity recorded.
Backlight
Press the " "key to activate the backlight, then press it again
to turn it off. If you do not press the button for 15 seconds, the
backlight will automatically turn off.
Temperature & Humidity Trend
1. indicates the temperature & humidity is in an increasing
trend.
2. indicates the temperature & humidity is in a no change
trend.
3. indicates the temperature & humidity is in a decreasing
trend.
BEFORE FIRST USE
1.Insert or Replace Battery: Insert two AAA batteries in correct
polarity (+) and (-) as indicated.
2.Do not immerse product body in water.
-3-
3.The humidity and temperature monitor is now ready to use.
CARE OF YOUR HUMIDITY/TEMEPRATURE MONITOR
Do not leave exposed to extreme high or low temperatures
since this will damage electronic parts and plastics.
 Remove battery if stored for more than four months.
Specifications
1.Temperature range: -58 °F ~ 158°F (-50 °C ~ 70 °C).
2.Humidity range: 10% ~ 99%.
3.Comfort display: DRY, COMFORT, WET.
4.Temperature display unit: °C °F selectable. /
5.Temperature Resolution: 0.1 °C/°F.
6.Humidity Resolution:1%.
7.Refresh rate：10 seconds.
8.Power supply: 2 X AAA 1.5V.
LIMITED ONE-YEAR WARRANTY
ThermoPro warrants this product to be free of defects in parts,
materials and workmanship for a period of one year, from date
of purchase.
Should any repairs or servicing under this warranty be required,
contact Customer Service by phone or email for instructions
on how to pack and ship the product to ThermoPro.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
CUSTOMER SERVICE
Telephone: 1-877-515-7797(USA & Canada only)
Email: service@buythermopro.com
Hours: Weekdays 8:00 AM- 6:00 PM EST
-4-