ITC SPT190 Manuel De L'utilisateur page 11

No. Description
15 Scale
16 Knob
17 Stator
18 Bearing
19 Rotor
20 Fan baffle
21 Screw
22 Bearing plate
23 Bearing
24 Spring
25 Plastic screw
26 Right handle
27 Flat washer
28 Spring washer
29 Screw
30 Right handle cover
31 Plug
2 Cord
33 Cord cover
34 Left handle
35 Capacitor
36 Plate
37 Screw
38 Switch
39 Left handle cover
40 Screw
41 Front cover
42 Threaded bearing cap
43 Torsion spring
44 Locking screw
ITC branded power tools, air nailers staplers and compressors are designed for use in DIY (do-it-yourself), light or
intermittent duty, semi-professional applications. They are not intended for use in professional, production, industrial or
continual use applications.
ITC makes every effort to ensure that its products meet high quality and durability standards and are warranted for two
years against manufacturers' faults and defects for a period of two years from the date of purchase to the original owner.
ITC will REPAIR OR REPLACE (at our discretion) merchandise deemed by the company to be defective, provided that it
is has not been misused, abused, altered, or repaired by anyone other than an authorized repair centre.
Please consult the ITC catalogue or your nearest ITC distributor to determine those products that are covered by our over-
the counter warranty. Any ITC tool that fails during normal use and within the specified warranty period and qualifies for
over-the counter warranty must be returned to its point of purchase for replacement or credit. Any item not listed as over-
the-counter warranty must be shipped, prepaid freight, to an authorized repair depot accompanied by a copy of the invoice
specifying the date that the item was purchased. Returned tools that are not accompanied by a proof of purchase (Copy of
Invoice) will not be repaired or replaced under warranty.
This warranty does not extend to normal wear or consumable parts such as brad and staple gun driver blades, grinding
discs, saw blades, driver bits, electric motor brushes, worn chords, etc. It also does not apply to ITC tools used in
professional, production, industrial or continual use applications.
For a listing of the authorized repair centers please refer to the ITC catalogue.
All manuals and user guides at all-guides.com
PARTS LIST
Please refer to Schematic Drawing on page 24.
WARRANTY
WARRANTY
No. Description
59 Guide bar
60 Spring
61 Guide bar sleeve
62 Screw
63 Depth stop turret
64 Steel ball
65 Spring
66 Adjusting screw
67 Spring
68 Router base
69 Plastic plate
70 Phillips screw
71 Wrench
72 Straight guide
73 Guide rod
74 Dust exhaust adaptor
75 Scale
6 Plastic plate
77 Screw
78 Butterfly screw
79 Sleeve
80 Location board
81 Guide wheel assembly
82 Square nut
83 Template guide
84 Phillips screw
85 Nut
86 Short sliding socket
87 Long sliding socket
88 Pan head screw
11