Table des Matières
Publicité
Parts Attachment / Replacement
GB
Adjustable armreast
① Fix the armrest to the bottom of the seat with the supplied
attachment plate and bolt.
（ Tool required：6 ㎜ hexagonal wrench ）
＊ Refer to the diagram on the right for the attachment plate
facing.
② Make sure the attached parts are not loose.
Fixed armrest
① Fix the armrest to the bottom of the seat with the supplied
attachment plate and bolt.
（ Tool required：6 ㎜ hexagonal wrench ）
＊ Refer to the diagram on the right for the attachment plate
facing.
② Make sure the attached parts are not loose.
Lumbar support
When attaching the lumbar support to chairs with backrest
upholstery, detach fasteners on each side of the upholstery
at lumbar area. And place the lumbar support between
upholstery and backrest shell.
① Clip one end of lumbar support to backrest shell, push tab
to align the height of lumbar support.
② Push tab on the other side of lumbar support, clip it to
backrest shell so that the end of tab fits the guide on
backrest shell.
③ Adjust lumbar support height by pushing down the tabs.
21
All manuals and user guides at all-guides.com
Attachment plate
Attachment plate
Side edge of
back shell
Tab
Guide
Lumbar support
Mesh / Cushion back
The plain back model can be changed to Mesh or Cushion
back model by attaching mesh or cushion cover parts.
① Hook the bottom pocket of the mesh or cushion cover
over the bottom end of the backrest shell.
② Turn the upper side of the pocket inside out, and hook
the cover pocket over the top end of the backrest shell by
flipping the cover right-side out.
③ Push the tabs of the mesh or cushion cover into the slits
of the backrest shell.
PLAIN BACK
MESH BACK
Tab
Mesh cover
Cushion cover
Tab attachment
position
CUSHION BACK
22
Publicité
Table des Matières
