Rear Wheel Assembly - Top Mark VISION T8040 Manuel D'instruction

TO OPEN STROLLER
1.
Push the Secondary Lock to right side.
2. Press the button 2.
3.
Step the rear wheel tube then pull the stroller upward.

REAR WHEEL ASSEMBLY

Press the release button in the middle of the rear wheel as in the picture 1 and
combine with the axle of rear wheel as in the picture 2.
Follow the same way for the other side.
Put both rear wheel housing on to the chassis, see picture 3.
To unlock the rear wheel press on the wheel cap in the middle of the rear wheel.
ASSEMBLING
Warning line( green colour)
-if the stroller is opened complete, then you will see the
warning line. Otherwise, it is not opened well.
19
Locked Unlocked
EN