Spin Function - Klarstein BUBBLE BOOST Manuel

SPIN FUNCTION

1. After the washing process is finished, drain the water and empty the washing drum.
2. Place the spin basket on the appliance and turn it counter-clockwise. Make sure it is
firmly in place.
3. Place the laundry in the spin basket and push down the pressure cover to prevent
the clothes from falling out during spinning. Close the top cover and set the
programme selector switch to the "Spin" position. Select the time according to the
type of clothes and start spinning. If the time setting is too long or you want to stop
halfway, turn the timer counter-clockwise to the "off" position. Wait until the basket
has stopped.
Note: The clothes should be evenly flat and covered with a pressure cover to avoid
unintentional displacement of the machine due to spinning.
4. After the spin time has elapsed, open the cover, remove the pressure cover and
take out the clothes to dry.
5. Turn the spin basket clockwise and pull it out of the drum.
Note: Remove the basket when washing. The spin basket is only used to drain the
clothes. The appliance does not dry the clothes.
EN
21