2.5
USER MENU
Description
Access this menu to edit the default password, add (the administrator can create up to 15 users) or remove new users and
define the respective rights. Position the "Active Frame" on the "User" icon and press "ENTER".
The following window will appear:
The selected item is highlighted.
Press arrows "◄►▲▼" to point the cursor to the various menu items.
Point the cursor to the required item and press "ENTER" to edit it. Use buttons "▲▼" to change the available options for the
selected menu item.
Select "CONFIRM" and press "ENTER" to make the changes effective.
Select "CANCEL" and press "ENTER" to cancel the changes.
Press "ESC" to go back by one step.
Press "ESC" several times until the configuration window closes to quit the configuration menu.
The box contains a list of the default users. The features of the default administrator are:
User →
Password
→
The "admin" name cannot be edited. The password can be edited.
IMPORTANT NOTE
THE DEFAULT PASSWORD IS "12345".
It is advisable to change the default password to prevent intrusions.
To enter/edit the password, remember to press "SHIFT" (make sure that the STATUS LED lights up) followed
by the number keys. At the end of the operation, press "SHIFT" to go back to default functions. The STATUS
LED will go out.
Do not lose or forget the programmed password.
Take note of the new password and keep it in a safe place.
It will not be possible to access the device in local mode (i.e. using the front panel) if an alphanumeric
password is chosen (using the dedicated software).
DS1093-029
All manuals and user guides at all-guides.com
Figure 31: user menù
admin
12345
47