Environmental Instructions; Installation Instructions - Würth 0715 93 000 Traduction Des Instructions De Service D'origine

Intended use
The creeper is only designated for working under
vehicles and is used in a lying position. The user
shall be liable for damages in the case of
improper use.
Device protection
The maximum permissible load
capacity (see technical data)
must not be exceeded.
In order to avoid damage due to overload, the max-
imum permissible load capacity must be complied
with.
Technical data
Item
Length
Width
Height
max. permissible load
capacity

Installation Instructions

Assembly of the castors
Insert the screw [7] through the hole in the
■
castor mount [6].
Insert the assembled parts [7/6] from below
■
into the designated hole in the creeper [1].
Now, insert the sleeve [5] from above through
■
the hole in the creeper [1] onto the screw [7].
Now, place the washer [4] onto the protruding
■
thread of the screw [7].
Screw the nut [3] onto the thread of the
■
screw [7].
Tighten the nut [3] with the aid of a suitable
■
socket wrench and a reversible ratchet.
Repeat the steps until all the castors are
■
attached.
3 The creeper is now ready for use.
8
0715 93 000
1010 mm
475 mm
130 mm
135 kg

Environmental instructions

Do not dispose of this device with
household waste. Dispose of the
device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regula-
tions. In case of doubt, contact your
waste disposal facility. Dispose of all packaging in
an environmentally compatible manner.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop.
Subject to technical changes without prior notice.
We accept no liability for printing errors.
Spare parts
Only use original spare parts. For all questions and
spare-part orders, pleas contact your Würth cus-
tomer service agent.
With any enquiries or spare parts orders, always
quote the item number as given on the device type
plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsman-
ager. Alternatively, contact your local Würth agency
for a hardcopy.