Keysight DAQ970A Guide D'utilisation page 189

Web Interface
The Keysight DAQ970A/DAQ973A Data Acquisition System include a built-in Web Interface for monitoring and
controlling the instrument via a Web browser.
Two available options to access the Web Interface:
– LAN Interface: Connect your instrument to the LAN interface and enter the instrument's IP address into the
address bar at the top of your PC's Web browser.
– Keysight IO Libraries Suite: Select the instrument in Connection Expert and click the Web UI button. Ensure that
the Keysight IO Libraries Suite is installed before you proceed for the remote interface configuration.
The following is a high-level overview of the Web Interface tabs shown on top of the Web Interface window.
When using the Web Interface, open a particular tab, and then click the help button
for that tab.
Home page
The Home Page displays basic instrument information. Click More Information or Less Information to toggle display
of LAN details and LXI compliance information. To change any of the information displayed on this page, use the
Control Instrument Page .
Check the "Enable front panel identification indicator" checkbox to enable a visual indicator that identifies the
DAQ970A/DAQ973A. This can help you physically locate the instrument in a rack, for example.
The indicator position and type can vary. Common indicators are LEDs, an onscreen message, or a message
displayed in a dialog box. Uncheck the checkbox to turn off the indicator.
Keysight DAQ970A/DAQ973A User's Guide
3 Features and Functions
to view help contents
189