camry CR 6606 Mode D'emploi page 4

proximity to heat sources.
19. Do not use this device with charcoal or similar combustible materials.
20. Before cleaning, movement, dismantling, assembling and storing the grill: Turn off the
device, disconnect it from the mains and wait until the grill will cool down.
21. Accessible surface temperatures can be high when the appliance is
operating. Never touch the hot surfaces of the appliance.
22. Never carry the device when it is turned on or when it is hot.
23. Do not place the device under kitchen shelves, due to the rising heat and steam.
24. The power cord can not be laid over the device, and should not touch or be near hot
surfaces. Do not place the device under an electrical socket.
25. Clean the unit after each use.
26. Do not use the appliance with wet hands.
27. Do not touch the surface of the device with any sharp objects (eg. a knife)
28. Do not cover the heating plate with aluminium foil , etc., as this can cause
cummulation of heat and damage the plastic parts and coating.
29. Do not put utensils on the heating plates during use. Grill should be opened with a
handle or grip according to the model.
30. Do not use plastic utensils when handling the grill, it can melt.
31. Before first use, remove all packaging components. Attention! In the case of a casing
with metal parts, on these elements a slightly visible protective foil can be stretched, which
should also be removed.
32. The equipment is not intended for use with external time switches or a separate
remote control system.
33. The manufacturer is not liable for damages resulting from improper use of the device.
34. NEVER cover the device during operation or when it does not cool down completely
35. Remember that the heating elements of the device take time to cool down completely
36. Do not expose the device to atmospheric conditions (rain, sun, etc.) or do not use in
conditions of high humidity (bathrooms, damp camping houses).
37. NOTE: Always unplug the oven from the electrical socket after use
DESCRIPTION
1. body
2. Plate BBQ
3. Pans
4. switch
BEFORE TURNING DEVICE
- Make sure the grill is on heat resistant surfaces
- Make sure that the grill is kept around enough space for ventilation
- Make sure that the device is dry
BEFORE FIRST USE
Clear all components of the device according to the guidelines located in the "Cleaning and Maintenance". Grease a small frying pan
gently (3) and grill plate (2). Apply on the body (1) of the heater plate to the grill (2) and slide the pans (3). Switch on for about 10
minutes to remove the protective covering from the heating elements. May occur at the same time to produce a small amount of
smoke. Make sure the room is properly ventilated.
USING THE MACHINE
Prepare all the ingredients, cutting them into small pieces or slices. Turn on the unit (3) and wait about 10 minutes to warm up well.
Place selected food on the plate for grilling (2). Pans (3) place the products for baking and grilling.
Make sure that the components are not in contact with the heating element.
CLEANING AND MAINTENANCE
Before cleaning, make sure the device is switched off and disconnected from the power source. Barbecue plate (2) and pans (3) wash
by hand in pure water with dishwashing liquid. Never immerse the body (1) in water. The body (1) can be wiped with a damp cloth.
TECHNICAL DATA:
Voltage: 220-240V ~ 50Hz Power: 800W Max Power: 1200W
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance
should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this
appliance in the common waste bin.
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE
ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE
DEUTSCH
DEUTSCH
DIESE FÜR DIE ZUKUNFT AUF
4