Power on
1
1. Press the power button for 3 seconds.
2. Enter the 4-letter PIN code. The default
PIN code is "AAAA" .
3. The mower will now await further
instruction in standby mode.
Start mowing
Press START button
Close the cover to start
Note: If the battery is below 70% charge,
the mower e nters 'charge to work' mode
until itreaches 90% charge. If lower than
30% themower returns to base station to
charge.
2
1. Press the power button for 3 seconds.
In standard mowing mode the mower will
proceed in a random fashion around your
garden, changing direction each time it
reaches the boundary wire.
- 16 -
User Manual
1