Zone
1. Press OK button to enter sub-menu 1.
2. Select zone
3. Press OK button to select the desired
zone.
4. Press UP, DOWN, LEFT and RIGHT
buttons to select the distance and
percentage.
5. Press OK button to confirm each zone.
6. Repeat step 3 to 5.
7. Press OK button to confirm the setting
of all the zones.
Spot mow
1. Place the mower in the garden.
2. Press OK button to enter sub-menu 1.
3. Select 'spot mode'.
4. Close the cover to start.
1
ZONE 1
ZONE 2
2
You can set up to 5 zones in your garden.
This enables you to decide which areas
need more or less attention. A zone is
defined by determining the boundary wire
distance from the charging station.
The distance should be 0 to 500m and
the percentages should add up to 100%
or the setting connot be completed
The mower can be placed within the
perimeter boundary and that the
function will mow in relatively uniform spiral
pattern for 5 minutes. This is useful when
you want to cover a specific area or clear
grass on the first mow more quickly.
- 19 -
User Manual
ZONE 3
3
mower placed here
spot mow